IMPORTANT READ ALL INSTRUCTIONS carefully and com: piety before using the transceiver. SAVE THIS INSTRUCTION MANUAL. This instruction manual contains important safety and operating instructions. For: telephone operation,: the OPB (Option Board) s required. Otherwise, only talk around operatic is available. Ask your system operator or com Dealer for details.
TABLE OF CONTENTS IMPORTANT UNPACKING . CAUTIONS TABLE OF CONTENTS 1 PANEL DESCRIPTION H Front and side panels & Keyboard .. i & Top and rear panes B Function display 2 ACCESSORY ATTACHMENT (s 5 3 BATTERY PACK CHARGING .. 2 Usable battery packs %4 Charging connections | & Battery pack Dry cell battery installation ., 4 TELEPHONE OPERATION . M Pr-operation .. Calling Answer back . 3 Output power selection #Redialing il .
1 PANEL DESCRIPTION B Front and side panels FUNCTION SWITCH FUNGI] When pushed and lend, some other switches perform secondary functions. "Push [FUN CT & & switch” means while pushing {FURN) push the switch.” SEND SWITCH [SNO] ~While in telephone operation: Pushily call of o answer back fora call Push again to end communicating, (pgs. 8,9) ~While In talk around operation: Push 1o transmit and release to receive. (.
PANEL DESCRIPTION 1 B Keyboard <> While in telephone operation < While in talk around operation Key Function Key Function @) & = co ® & While In code kennel: setting display: let 2 MDT memory channel. Program code channel, ~Cancels re-dialing function. (5. 9 e Activates or cancels the pager or code ~ Exits MDT MEMORY rode, squelch unction. (0. 15) Cancels telephone number. (0. 8) Rune While In code channel setting display: ©+ Sets a cods channel for “recessive Inhibit® Allows you to re-dial. (p.
ul 1 PANEL DESCRIPTION B Top and rear panels CHARGING JACK [DC13.5V] Connects the optional WALL CHARGER for regular charging. (p. §) CAUTION: DO NOT turn the power ON while charging. This jack is Used for charging only. DO MOT connect the wall charger while operating with dry cell batteries using the optional BP-158 BATTERY CASE. Otherwise, battery leakage may occur. BATTERY PACK RELEASE BUTTON (0.7 ANTENNA CONNECTOR MA-type: connector. Connects the supplied antenna.
¥ Function display FUNCTION INDICATOR Appears while [FUN] is pushed and held. : SCAN INDICATOR Appears while scanning. (0. 13) MOM-SCAN INDICATOR Appears during hop-scanning condition (p.13) PANEL DESCRIPTION 1 PAGER INDICATOR Appears while the pager function 1s in use. (p. 183 CODE SQUELCH INDICATOR Appears white the cods squelch function sinusitis {poop) lJ"? N% \1 BATTERY VOLTAGE INDICATOR Graphically shows remaining dry cell battery capacity. (p.
2 ACCESSORY ATTACHMENT < Antenna insert the supplied antenna info the antenna connector and screw down the antenna. KEEP the jack cover chastised when jacks ire: not In: use to avoid: bad contacts. CAUTION: Transmitting without the antenna may damage the transceiver. % Jack cover < Hand strap Install the hand strap to the supplied belt clip. The hand strap facilitates carrying. < Belt clip Remove the plastic screws, then attach the belt clip with the supplied metal screws.
OPB iIs required. Pr-operation MOTE: For telephone overexertion, the OPB (Grafton Board) is required. Otherwise: only talk around operation is available. Ask your system operator or loom 7 Dealer for details. \\W Charge the gallery pack before first operating the transceiver or when ths battery pack becomes exhausted, Rotate [VOLT 1o 0 o'clock position or lower. Push POWER] for nosecone to turn the power ON or QFF.
4 TELEPHONE OPERATION B Answer back (1) When you are called, push [SND] fo answer back. & The transmit indicator lights up inured: The RE indicator shows the selected output power level. (2 Hold the transceiver like a telephone handset. @ Begin communication. @& Push [SND] again to end communication. NOTE: Answer back operations may differ om above. Ask your system operator or [com Dealer for details. e | Output power selection High or low output power level s delectable. if required.
4 TELEPHONE OPERATION B Lighting For says operation at night, the function display and keyboard can be illuminated. < 5 sec. timer Push [LIGHT] to wim the lighting ON. Tha lighting automatically turns OFF fare 5 sec. i the tuning dial, switch or keyboard are. not operated. To turn QFF the lighting manually, puns [LIGHT] again.
6 PAGER AND CODE SQUELCH B Pager operation This function can be used as a ‘message pager’ to inform vou of calls even it you leave the transceiver temporarily. O Salting () F Push 1 tme. s "PGR" appears. Push [FUNCTOR 8] . Rotate [DIAL 1o select 2 code channel from C1-C5. @ Personal | Select a code channel tat con tams receiving call parties' 1D code. ‘ Group Select a code channel that contains your group call code. You can Cali all stations in your group. @ Push pl ® Push [SND] io transmit the pager code.
<> Battery packs and carrying case Battery | Height with s B L Carrying pack transceiver Voltage Capably case BRAES I mmi44in 60V 800.mAk LC:108 BP-152 1126 B0V 1109 mAL L1 g g Battery case for BP-158 {1ttt dimming RE (AA) x 4 LC-108 <> Chargers and battery pack adapter b ] opt Ions / N NEVER use the BP-153 BATTERY PACK. This 12 V battery pack will ruin the transceiver. NEVER attempt to charge the BP-158 BATTERY CASE when dry cell batteries are installed. .
