User Guide

CONNECTIONS AND INSTALLATIONS

■ Antenna assembling

AH-106

q Remove the pole clamp that attached to the eleva-

tion angle.

w Unscrew 4 bolts from the elevation angle.

e Attach the element-arm onto the reﬂector.

NOTE: Check the orientation.

r Attach the elevation and sub elevation angles as

the diagram at left.

Fix the angles using with the bolts that are un-

screwed at steps w and are attached with the sub

elevation angle.

NOTE: Select the suitable screw hole position

that the point where the suitable parabolic an-

tenna beams angle is provided with the sub ele-

vation angle adjustment.

☞

Continue to the next page.

Sub elevation

angle

Elevation angle

Element arm

Top Reflector

Reflector

Elevation

base angle

Element-

arm

LongShort

Bottom

Element arm

Unscrew

Elevation angle

R DANGER!: Antenna installation is intended for

professional installation only. We are not responsible

for any building breakage, any damage resulting

from a drop of the antenna from a high place or un-

stable site or resulting from any personal injury nor

any accident in any other cases. Be sure to consult

an expert engineer for installations.