User Guide

32
5
DRIVER INSTALLATION
DD
Microsoft
®
Windows
®
98/Me
q Start up Windows.
w Connect the PC and the ID-RP2C [SERVICE1] con-
nector through an USB cable (A-B type; purchase
separately)
.
e Right click “My Computer” then select “Properties.”
r “System Properties” screen appears as at left.
Click [Device Manager] tub.
t Click “ ” of Ports (COM&LPT).
y Confirm “ICOM ID-RP2C SERVICE1 (COM✱)” is
displayed.
• If not displayed, or few COM port numbers are displayed
at the same time, the driver installation may not be in-
stalled properly. Un-install the USB driver then re-install
the driver again in such cases.
NOTE: “✱” is the COM port number, that is used
for the communication setting with the utility soft-
ware.
<e.g.: When driver re-installation is required>
“ICOM ID-RP2C SERVICE1 (COM✱) (COM✱)”
Check the connected unit and connector names,
and COM port number.
(In this example, the USB serial port number is “4.”)
Click
Click