User Guide

9
47
SPECIFICATIONS AND OPTIONS
■ Specifications
DD
ID-RP2C
• General
Power supply requirement : 13.8 V DC ±15% (negative ground)
Current drain : Less than 0.5 A
Usable temperature range : –10˚C to +50˚C; +14˚F to +122˚F
Dimensions (approx.; proj. not incl.) : 483(W)×44(H)×257(D) mm; 19(W)×1
3
⁄4(H)×10
1
⁄8(D) in.
Weight (approx.) : 2.7 kg; 5 lb 15 oz
Repeater control protocol : Compatible to D-STAR standard
• Local repeater interface
Max. number of connections : 4
Communication speed : Data 128 kbps
Voice 4.8 kbps
Cable length (approx.) : 3 m; 10 ft (standard; supplied cable of the ID-RP2D/V)
• Assist repeater interface
Max. number of connections : 2
Communication speed : Data 10 Mbps
Setting CPU communication 19.2 kbps
Cable length (approx.) : 30 m; 100 ft
(standard; connected cable of the ID-RP2L)
• Wired interface
Number of connector : 1
Type of connection : 10Base-T
MAC address : Unique ID
IP address : Programmed with the utility.
DD
ID-RP2L
• General
Frequency range : Receive #06=10.000 to 10.025 GHz
#07=10.150 to 10.175 GHz
Transmit #06=10.150 to 10.175 GHz
#07=10.000 to 10.025 GHz
Type of emission : F1D* (GMSK)
*F7W for system operation (w/ID-RP2C)
Frequency stability : ±5 ppm (based on 25˚C; +77˚F)
Frequency resolution : 250 kHz
Antenna connector : Type-N (impedance: 50 Ω)
Communication speed : 10 Mbps
Power supply requirement : 13.8 V DC ±15% (negative ground)
Current drain : Tx Less than 2.3 A
Stand-by Less than 0.7 A
Usable temperature range : –30˚C to +60˚C; –22˚F to +140˚F
Dimensions (proj. not incl.) : 328(W)×262(H)×116(D) mm; 12
29
⁄32(W)×10
5
⁄16(H)×4
9
⁄16(D) in.
Weight (approx.; incl. cables) : 14.6 kg; 32 lb 3 oz
• Transmitter
Output power (at 13.8 V) : 2.0 W
Modulation system : Quadrature (525.75 MHz)
Occupied bandwidth : Less than 10.5 MHz
Spurious emissions : Less than 100 µW
• Receiver
Receive system : Double-conversion superheterodyne
Intermediate frequencies : 1st 1747.5 MHz
2nd 374 MHz
Sensitivity
(BER 1×10
–2
) : Less then –78 dBm
Receive spurious : Less than –57 dBm