Operation Manual

59
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes. ➥
“RCVD TEST ACK” is displayed. The backlight blinks for ➥
2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
 •Evenifyoudonotpush[ALARMOFF],thealarmstopsafter2
minutes, and then the screen in step w is displayed.
Push a softkey to select your desired action. w
[EXIT]
Push to return to the normal operating mode. ➥
  •ThetransceiverexitstheDSCmode.
  •“ ” continues to blink and the Call is stored in the Received
Call Log.
■ Transmitted Call log
The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
Enter “TX CALL LOG” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Transmitted Call Log
(Push [MENU].) (Rotate Dial, then push [ENT].)
Push [ w Y]/[Z] to select the desired item, then push [ENT].
 •Push[BACK]toreturntothepreviousscreen.
 •Push[EXIT]toreturntothenormaloperatingmode.
Rotate Dial to scroll the DSC message contents. e
Rotate
To delete the displayed DSC message, push [DEL]. r
 •Theconrmationscreenisdisplayed,thenpush[OK]todelete.
Push [EXIT] to return to the normal operating mode. t