User's Manual

CONNECTIONS AND MAINTENANCE

r Return the cables and screws to the original position.

• Be sure not upside down the ﬂat cable.

CAUTION:

• When re-assembling the case and tightening the screws,

you must keep the speciﬁed torque (0.5±0.07 N.m). Oth-

erwise the transceiver may be damaged (torque too high)

or lose waterproof efﬁciency (torque too low).

• When uninstalling the optional unit, remove it vertically.

Wiggling the unit from side to side may damage the op-

tional unit's connector.

■ HM-162E installation

The optional HM-162E should be installed to the transceiver

using the supplied connection cable.

The connector of the connection cable can be installed into a

cabinet, wall, etc., as a built-in plug.

For longer distance remote operation, the optional extension

cable, OPC-1541 (6 m; connecting between transceiver and

the connection cable), is available, and up to two OPC-1541

can be added.