Operation Manual
16
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
AquaQuake water draining ■
function
The AquaQuake water draining function clears water away
from the speaker grill. Without this function, water may muffle
the sound coming from the speaker. The transceiver emits a
vibrating beep when this function is activated.
While holding down [AQUA], the AquaQuake function is acti- ➥
vated to clear water away from the speaker grill.
•Beepsounds,regardlessofthevolumelevelsetting.
•Activatesfor10secondsinmaximumtodrainwater.
•The transceiverneveracceptskeyoperationwhilethe Aqua-
Quake function is activated.
•TheAquaQuakefunctioncannotbeactivatedwhenanoptional
speaker-microphone is connected.
Backlight setting ■
This function lights the function display and keys, and it is
convenient for night-time operation.
Select q [BKLT] to enter the backlight adjusting mode.
Push w [∫]/[√] or [Ω]/[≈] to adjust the brightness level be-
tween 1(minimum) to 7 (maximum) or OFF.
•Thedefaultsettingis4.
•Thedisplayreturnsautomaticallytothemainmenuafter5sec-
onds without no key operation is been performed.
•ThebacklightautomaticallyturnsOFFwhennokeyoperation
is performed for 5 seconds.
Channel name programming ■
Each channel can be assigned a unique alphanumeric ID of
up to 10 characters.
Capital letters, 0 to 9, some symbols (! " # $ % & ' ( ) * + , – .
/ [ \ ] ^ _ : ; < = > ?) and space can be used.
Push [ q ∫](CH) or [√](CH) to select a channel.
•First,canceltheDualwatch,Tri-watch*orScan*function,ifac-
tivated.
Push [NAME] to open the channel name programming w
screen.
•Ablackboxisdisplayedontherstcharacter.
Enter the desired channel name in the following manner: e
•Selectadesiredcharacterusing[∫]/[√]/[Ω]/[≈].
•Push[ENTER].
•Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
•Select“SPACE,”thenpush[ENTER]toinputaspace.
•Select“DELETE,”thenpush[ENTER]todeleteacharacter.
•Push[CLEAR]tocancelandreturntothepreviousscreen.
* Except for the Dutch version