Operation Manual

19
6
SCAN OPERATION (Except for the Dutch version)
Starting a scan ■
First, set the scan type (Priority or Normal scan) and scan re-
sume timer in the Menu screen. (p. 78)
Select the desired channel group. (p. q 13 )
Set the Favorite channels, as described to the left. w
Make sure the squelch is closed to start a scan. e
Push [SCAN] to start a Priority or Normal scan. r
 •“SCAN 16” appears during a Priority scan; “SCAN” appears
during a Normal scan.
 •When a signal is detected, the scan pauses until the signal
disappears, or resumes after pausing 5 seconds, depending
on the setting. (Channel 16 is still monitored during a Priority
scan.)
 •Push [Y]/[Z] check the scanning Favorite channels, change
the scanning direction or manually resume the scan.
 •Abeeptonesoundsand“16”blinkswhenasignalisreceived
on Channel 16 during a Priority scan.
To stop the scan, push [CLEAR] or repeat step t r.
Setting Favorite channels ■
For more efficient scanning, add the desired channels as Fa-
vorite channels, or clear “
” for unwanted channels.
Channels that are not tagged will be skipped while scanning.
Favorite channels can be independently assigned to each
channel group (INT, USA, ATIS or DSC).
q
Select the desired channel group. (p. 13 )
w Select the desired channel to be set as a Favorite channel.
Push [ e ] to set the displayed channel as a Favorite channel .
 •“ ” appears on the display.
To cancel the Favorite channel setting, repeat step r e.
 •“ ” disappears.
Clearing (or setting) all tagged channels ✓
Hold down [] for 3 seconds (until a long beep changes to
2 short beeps) to clear all Favorite channel settings in the
selected channel group.
•RepeataboveproceduretosetallchannelsasFavoritechannels.
Scan starts. When a signal is received.
Push
[SCAN]
[Example]: Starting a Normal scan.