Operation Manual

22
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
New2001
Programming Group ID D
Enter “GROUP ID” in the DSC SETTINGS menu. q
Push [ADD]. w
 •The“GROUPID”programscreenisdisplayed.
Enter a desired group ID in the following way: e
 •Selectadesirednumberusing[Ω]/[≈].
 •Push[ENTER]tosetit.
 •Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
The first digit is fixed as ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
Repeat step r e to input the specific 9 digits group code.
After entering the 9 digit code, push [ENTER] to set it. t
 •TheGroupIDnameprogrammingscreenisdisplayed.
Enter a desired 10 digit ID name in the following way: y
 •Selectadesiredcharacterusing[∫]/[√]/[Ω]/[≈].
 •Push[ENTER]tosetit.
 •Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
 •Push[123],[!$?]or[ABC]toselectacharactergroup.
After entering the ID name, push [ u ∫]/[√]/[Ω]/[≈] to select
“FINISH,” then push [ENTER] to program it.
 •The“GROUPID”listscreenisdisplayed.
Push [MENU] to exit the MENU screen. i
MENU ➪ DSC Settings ➪  Group ID 
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)