Operation Manual

29
8
DSC OPERATION
New2001
New2001
Transmitting DSC calls ■
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL LEVEL. (p. 63)
Transmitting an individual call D
The Individual call function allows you to transmit a DSC sig-
nal to only a specific station.
Enter “INDIVIDUAL CALL” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Individual Call
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
Select the desired preprogrammed individual address, or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
 •TheIDcodefortheIndividualcallcanbesetrst. (p. 21)
 •When“ManualInput”isselected,setadesired9digitMMSIID
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
•Selectadesirednumberusing[Y]/[Z]/[Ω]/[≈].
•Push[ENTER]tosetit.
•Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
•Therstdigitisspeciedas‘0’foraGroupID.IfaGroupIDis
entered, an error beep sounds after pushing [FINISH].
•Thersttwodigitsare‘0’foranycoaststationID.
Select Routine, Safety or Urgency as the desired call type e
using [Y]/[Z], then push [ENTER].
NOTE: When a coast station is selected in step w, the
voice channel is automatically specified by the coast sta-
tion. Therefore, skip step r and go directly to step t.