Operation Manual

33
8
DSC OPERATION
New2001
New2001
Manual ACK:
Enter “INDIVIDUAL ACK” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Individual ACK
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
 •WhennoIndividualcallhasbeenreceived,“IndividualACK”item
will not be displayed.
Select a desired individual address or ID code to reply to, w
using [Y]/[Z], then push [ENTER].
Perform steps e e to u, as described in “Quick ACK:,” be-
ginning on the previous page.
Transmitting a Group call D
The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter “GROUP CALL” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Group Call
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
Select the desired preprogrammed group address or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
 •TheIDcodefortheGroupcallcanbesetrst. (p. 22)
 •When“ManualInput”isselected,setthe8digitIDcodeforthe
group you wish to call.
Select a desired intership channel using [ e Y](CH)/[Z](CH),
then push [ENTER].
 •Intershipchannelsarealreadypresetintothetransceiverinthe
recommended order.