Operation Manual

41
8
DSC OPERATION
New2001
New2001
Manual Reply:
Enter “POSITION REPLY” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Position Reply
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
 •IfnoPositionRequestcallhasbeenreceived,the“POSITION
REPLY” item will not be displayed.
Select a desired Position Request call to reply to, using w
[Y]/[Z], then push [ENTER].
The Position Reply call confirmation screen is displayed. e
Push [CALL] to transmit the acknowledgement call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
When no GPS data is received or invalid data is received,
and both position and time have been manually programmed,
the screen shown below appears. Edit your latitude and lon-
gitude position and UTC time as follows:
Push [CHG], then edit your latitude and longitude position ➥
and UTC time.
 •Selectadesirednumberusing[Ω]/[≈].
 •Push[ENTER]tosetit.
 •Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
 •SelectN(Northlatitude)orS(Southlatitude)whenthecursor
is on the ‘N’ or ‘S’ position.
 •SelectW(Westlongitude)orE(Eastlongitude)whenthecur-
sor is on the ‘W’ or ‘E’ position.