Operation Manual

61
8
DSC OPERATION
New2001
New2001
DSC Settings ■
D Position Input (See page 24)
D Add Individual ID/Group ID (See pages 21 and 22)
D Delete Individual ID/Group ID (See page 23)
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
“Auto TX” or “Manual TX.”
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When “INDIVIDUAL ACK” is set to “Auto TX,” the trans-
ceiver automatically transmits the Acknowledgment call
including “Unable to Comply” (No Reason Given) after re-
ceiving the Individual call.
q
Enter either “INDIVIDUAL ACK,” “POSITION ACK” or “TEST
ACK” in the DSC Settings menu.
MENU ➪ DSC Settings ➪  Individual ACK 
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
MENU ➪ DSC Settings ➪  Position ACK 
MENU ➪ DSC Settings ➪  Test ACK 
Push [ w p] or [q] to select “Auto TX” or “Manual TX,” then
push [ENTER].
 •Push[BACK]tocancelandreturntotheDSCSettingsmenu.
(default: Manual)
(default: Auto TX)
(default: Auto TX)
Push [EXIT] to return to the normal operating mode. e