Operation Manual
63
8
DSC OPERATION
New2001
New2001
D Alarm
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
q Enter “ALARM”
in the DSC Settings menu
.
MENU ➪ DSC Settings ➪ Alarm
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
w Push [p] or [q] to select
the status, then push [ENTER].
•Push[BACK]tocancelandreturntotheDSCSettingsmenu.
•“Safety,”“Routine,”“Warning,”“Self-Terminate”and“Discrete”are
selectable. (default: ON)
Push [ e p] or [q] to set the Alarm setting to “ON” or “OFF.”
Push [EXIT] to return to the normal operating mode. r
D Channel 70 Squelch level
Set the squelch level on Channel 70.
The transceiver has 11 squelch levels between 1 (loose
squelch) and 10 (tight squelch) and OPEN.
OPEN is completely open.
q Enter “CH 70 SQL LEVEL”
in the DSC Settings menu
.
MENU ➪ DSC Settings ➪ CH 70 SQL Level
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
w Push [p]/[q]/[]/[] to adjust the squelch level until the
noise just disappears, then push [ENTER].
•Push[BACK]tocancelandreturntotheDSCSettingsmenu.
(default)
Push [EXIT] to return to the normal operating mode. e