Operation Manual

67
9
OTHER FUNCTIONS
MOB (Man Overboard) (Continued) ■
Editing the MOB point: Push [EDIT]
The stored MOB position can be changed.
Push [EDIT] to enter the position data editing screen. q
Edit specific latitude and longitude data in the following w
way:
 •Selectadesirednumberusing[Y]/[Z]/[Ω]/[≈].
 •Push[ENTER]tosetthedigit.
 •SelectN(Northlatitude)orS(Southlatitude)whenthecursor
is on the ‘N’ or ‘S’ position.
 •SelectW(Westlongitude)orE(Eastlongitude)whenthecur-
sor is on the ‘W’ or ‘E’ position.
 •Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
 •Tosetthescreendata,select“FINISH,”thenpush[ENTER].
After the confirmation screen appears, push [OK] to save e
the position data and return to the MOB screen.
Deleting an MOB point: Push [DEL]
The stored the MOB point can be deleted.
Please note that a deleted MOB point cannot be restored.
Push [DEL] to delete the MOB point. q
 •Theconrmationscreen“AREYOUSURE?”appears.
Push [OK] to delete the data and return to the MOB w
screen.
 •Ablankscreenappears.
 •Push[EXIT]toreturntothenormaloperatingmode.
 •Push[BACK]toreturntotheMENUscreen.