Operation Manual

68
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Waypoint ■
You can store your vessel’s position information wherever you
are, and also the position information of the vessel you re-
ceived a DSC call from, as a waypoint. The transceiver can
store up to 50 waypoints. Each waypoint can be programmed
with an alphanumeric name for easy recognition. Names can
be a maximum of 10 characters.
To store your position:
➥ Hold down [WP] for 1 second to store the waypoint.
 •Twobeepssound.
 •Aftermemorizingthewaypoint,theinformationscreen“WAY-
POINT WAS STORED” appears.
 •IftheGPSreceiverhasnotyetcalculatedtheposition,theway-
point cannot be stored.
 •Ifyouhavealreadystored50waypoints,thenewwaypointcan-
not be stored.
To store a received position:
After receiving a DSC call that includes the position informa-
tion, the position can be registered as a waypoint.
Enter “RCVD CALL LOG” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Received Call Log
(Push [MENU]) (Push [p]/[q] , then push [ENTER].)
 •Pushingthe[LOG]softkeyalsoopensthescreen.
Push [ w p] or [q] to select “Distress” or “Others,” then push
[ENTER].
Push [ e p] or [q] to select the desired item, then push [EN-
TER].
Push [WP] to store. r
 •Theconrmationscreen“STOREWAYPOINT?”appears.
Push [OK] to register the received position as a waypoint. t
 •Ifyouhavealreadystored50waypoints,thenewwaypointcan-
not be stored.
 •The receivedpositionisstoredwithitsMMSIID codeasthe
waypoint name. If the ID code has been programmed in your
Individual address, the position is stored with the name instead
of the ID code.