Operation Manual

70
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Adding the waypoint: Push [ADD]
New waypoints can be manually programmed with a name
and position data.
Push [ADD] to enter the name programming screen. q
 •Anyoneof“WP01”to“WP50”appearsasadefaultname.
If desired, enter a 10 digit name in the following way: w
 •Selectadesiredcharacterusing[Y]/[Z]/[Ω]/[≈].
 •Push[ENTER]tosetit.
 •Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
 •Push[123],[!$?]or[ABC]toselectacharactergroup.
After entering the name, select “FINISH” by pushing [ e Y]/
[Z]/[Ω]/[≈], then push [ENTER] to set it and enter the posi-
tion data editing screen.
 •Thecurrentpositiondataappearsoneachscreen,asthede-
fault.
 •Selectadesirednumberusing[Y]/[Z]/[Ω]/[≈].
 •SelectN(Northlatitude)orS(Southlatitude)whenthecursor
is on the ‘N’ or ‘S’ position.
 •SelectW(Westlongitude)orE(Eastlongitude)whenthecur-
sor is on the ‘W’ or ‘E’ position.
 •Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
 •Tosetthescreendata,select“FINISH,”thenpush[ENTER].
After the confirmation screen appears, push [OK] to save r
the waypoint and return to the waypoint list screen.