Operation Manual

71
9
OTHER FUNCTIONS
Waypoint (Continued) ■
Editing the waypoint: Push [EDIT]
The stored waypoint name and its position data can be
changed.
Push [EDIT] to enter the name programming screen. q
 •Thepreprogrammednameisdisplayed.
 • If desired, enter a 10 digit name as described in the step w of
the previous page.
w Edit specific latitude and longitude data in the following way:
 •Thepreprogrammedpositiondataappearsoneachscreen.
 •Selectadesirednumberusing[Y]/[Z]/[Ω]/[≈].
 •Push[ENTER]tosetthedigit.
 •SelectN(Northlatitude)orS(Southlatitude)whenthecursor
is on the ‘N’ or ‘S’ position.
 •SelectW(Westlongitude)orE(Eastlongitude)whenthecur-
sor is on the ‘W’ or ‘E’ position.
 •Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENTER].
 •Tosetthescreendata,select“FINISH,”thenpush[ENTER].
After the confirmation screen appears, push [OK] to save e
the waypoint and return to the waypoint list screen.
Deleting the waypoint: Push [DEL]
The stored waypoint can be deleted.
Please note that a deleted waypoint cannot be restored.
Push [DEL] to delete the waypoint. q
 •Theconrmationscreen“AREYOUSURE?”appears.
Push [OK] to delete the waypoint and return to the way- w
point list screen.