Operation Manual

89
13
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The transceiver does
not turn ON.
•The Battery is exhausted or over dis-
charged.
•TheBatterypackisnot correctly attached.
•Rechargethebatterypack.
•Correctlyattachthebatterypack.
p. 83
p. 3
Little or no sound comes
from the speaker.
•Thesquelchlevelissettoohigh.
•Thevolumelevelissettoolow.
•Thespeakerhasbeenexposedtowater.
•Waterhasenteredto[SP/MIC]connector.
•Setthesquelchtothethresholdpoint.
•Setthevolumetoasuitablelevel.
•RemovethewaterwiththeAquaQuakefunc-
tion.
•Dry[SP/MIC]connector
p. 14
p. 16
–
Transmitting is impos-
sible
•Some channels are programmed for low
power or receive only by regulations.
•Thebatteryisexhausted.
•Thebatteryisovercharged.
•Theoutputpowerissettolow.
•Changechannels.
•Rechargethebatterypack.
•Verifythebatteryvoltageiscorrect.
•Push[HI/LO]toselecthighpower.
p. 12
p. 83
p. 14
Scan does not start. •Favoritechannelsarenotprogrammed. •Setthe desired channelsas Favoritechan-
nels.
p. 19
No beeps sound. •BeeptonesareturnedOFF. •TurnthebeeptonesONintheCONFIGURA-
TION menu.
p. 79
Distress calls cannot be
transmitted.
•MMSI (DSC self ID) code is not pro-
grammed.
•ProgramtheMMSI(DSCselfID)code. p. 10