Owners manual

32
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Sending on the “Compose Other” screen
You can also send a Test Acknowledgement by selecting
“Test ACK” on the “Compose Other” screen.
This enables you to resend an Acknowledgement, or send
even after ignoring the call when you rst received it.
1. Push the software key below
.
• The ”Compose Other” screen is displayed.
2. Push [▲] or [▼] to select “Test ACK,” and then push
[ENT].
• The Test caller’s station or MMSI is displayed.
L “Test ACK” is not displayed if no Test call has been received.
D Sending a Position Reply call
Send a Position Reply call when a Position Request call
is received. If the Auto ACK function is set to “Auto,” the
Acknowledgement is automatically sent to the calling
station. (p. 42)
1. While a Position Request call is being received, push
any software key to turn OFF the alarm.
2. Push the software key below [ACPT].
• The received call’s information is displayed.
L If you want to send an “Able to Comply” Acknowledgement
right away, push the software key below [ABLE].
L If you cannot send a reply call, push the software key below
[UNABL].
3. Push the software key below [ACK].
Continued on the next page.