Owners manual
Table Of Contents
- Front cover
- IMPORTANT
- FEATURES
- EXPLICIT DEFINITIONS
- IN CASE OF EMERGENCY
- PRECAUTIONS
- RECOMMENDATION
- INFORMATION
- DISPOSAL
- COUNTRY CODE LIST
- TABLE OF CONTENTS
- 1. OPERATING RULES
- 2. SUPPLIED ACCESSORIES AND ATTACHMENTS
- 3. PANEL DESCRIPTION
- 4. PREPARATIONS
- 5. BASIC OPERATIONS
- 6. SCAN
- 7. DUALWATCH/TRI-WATCH
- 8. DSC OPERATION
- 9. OTHER FUNCTIONS
- 10. MENU SCREEN
- 11. BATTERY CHARGING
- 12. OPTIONAL SPEAKER MICROPHONE
- 13. TROUBLESHOOTING
- 14. SPECIFICATIONS AND OPTIONS
- 15. CHANNEL LIST
- 16. SAFETY TRAINING INFORMATION
- INDEX
- Back cover
39
8
DSC OPERATION
New2001
D Receiving a Test call
1. Push any software key to turn OFF the alarm.
2. Push the software key below your next operation.
[IGN]
• Ignores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display the call message.
[ABLE]
• Sends the Acknowledgement “Able to Comply.”
• The call is saved in the DSC Log.
[ACPT]
• Accepts the call.
• Displays the received call’s information.
• The call is saved in the DSC Log.
• Push the software key below [ACK] to send a Test
Acknowledgement call. (p. 32)
• Push the software key below [RESEND] to resend.
NOTE: If the Auto ACK function is set to “Auto,” the Test
Acknowledgement call is automatically sent to the calling
station when the call is received. (p. 42)
When a Test call is received:
• The alarm sounds for 2 minutes.
• “RCVD Test Call” is displayed.
TIP: By default, the Auto ACK function automatically
sends an Acknowledgement to the calling station (p. 42).
If the function is set to “Manual,” the following screens are
displayed.