Owners manual
Table Of Contents
- Front cover
- IMPORTANT
- FEATURES
- EXPLICIT DEFINITIONS
- IN CASE OF EMERGENCY
- PRECAUTIONS
- RECOMMENDATION
- INFORMATION
- DISPOSAL
- COUNTRY CODE LIST
- TABLE OF CONTENTS
- 1. OPERATING RULES
- 2. SUPPLIED ACCESSORIES AND ATTACHMENTS
- 3. PANEL DESCRIPTION
- 4. PREPARATIONS
- 5. BASIC OPERATIONS
- 6. SCAN
- 7. DUALWATCH/TRI-WATCH
- 8. DSC OPERATION
- 9. OTHER FUNCTIONS
- 10. MENU SCREEN
- 11. BATTERY CHARGING
- 12. OPTIONAL SPEAKER MICROPHONE
- 13. TROUBLESHOOTING
- 14. SPECIFICATIONS AND OPTIONS
- 15. CHANNEL LIST
- 16. SAFETY TRAINING INFORMATION
- INDEX
- Back cover
46
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Waypoint
Waypoints are GPS position data points of places you want
to go to, the position of your own vessel, or of a vessel you
received a DSC call from. You can enter up to 50 Waypoints
with names of up to 10 characters. You can enter your
current position information, or add one as a destination or
landmarks you often go to, as information for easy access.
D Entering a Waypoint
Entering your current position as a Waypoint:
1. Push[◄]or[►]todisplay
.
2. Hold down the software key
below
for 1 second.
• “Waypoint was stored” is displayed.
• The current position is entered as a
Waypoint.
L You cannot register a Waypoint if
no GPS data is received.
3. Push [CLR
é
]toreturntothe
operating screen.
Manually entering a Waypoint:
1. Push[◄]or[►]todisplay
.
2. Push the software key below
.
• The “Waypoint” screen is displayed.
3. Push[◄]or[►]todisplay[ADD].
4. Pushthesoftwarekeybelow[ADD].
• Enters the Waypoint entry mode.
• The current position is displayed in the entry boxes.
Waypoint entry mode
TIP:
• Select a number or the compass
directionusing[▲]/[▼]/[◄]/[►].
• Push[ENT]toentertheselected
number.
• Select“←”or“→,”tomovethe
cursor.
• Push the software key below to
select latitude, longitude, and name.
TIP:
• Select[!$?]tousecharacters,andselect[ABC]touse
numbers and letters.
• Selectcharactersorspaceusing[▲]/[▼]/[◄]/[►].
• Push[ENT]toentertheselectedcharacter.
• Select“←”or“→,”tomovethecursor.
5. Edit the latitude and longitude.
Entering a Waypoint name:
1. After editing the latitude and longitude, push the
softwarekeybelow[NEXT]toselect“Name.”
2. Push the
software key
below
to
save the edited
name.