Owners manual

66
14
SPECIFICATIONS AND OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Transmitter
• Output power: 5 W/1 W
• Modulation system: Variable reactance frequency
modulation
• Maximum frequency deviation: ±5 kHz
• Adjacent channel power: 70 dB
• Spurious emissions: 0.25 µW
D Receiver
• Sensitivity (typical): –6 dBµ emf at 20 dB SINAD
• Squelch sensitivity (threshold, typical):
–6 dBµ emf
• Intermodulation rejection ratio: 68 dB
• Spurious response rejection ratio: 70 dB
• Adjacent channel selectivity: 70 dB
• Audio output power (at 10% distortion ):
0.2 W (External) with an 8 ˘ load
0.9 W typical (Internal) with a
12 ˘ load at 1 kHz
IC-M93D EURO (Australian version)
D General
• Frequency coverage: TX 156.025 ~ 157.425 MHz
RX 156.300 ~ 162.025 MHz
• Mode: FM (16K0G3E), DSC (16K0G2B)
• Operating temperature range: –10°C ~ +55°C
• Current drain (approximately): TX (5 W) 1.5 A
TX (1 W) 0.7 A
RX maximum audio 0.25 A (External)
0.45 A (Internal)
• Power supply requirement: 7.2 V DC nominal (negative ground)
• Frequency stability: ±10 ppm (–10°C ~ +55°C)
• Antenna impedance: 50 ˘ nominal
• Dimensions (approximately): 57 (W) × 144.6 (H) × 38.5 (D) mm
(Projections not included)
• Weight (approximately): 265 g/9.3 oz with BP-285
D Transmitter
• Output power: 5 W/1 W
• Modulation system: Variable reactance frequency
modulation
• Maximum frequency deviation: ±5.0 kHz
• Adjacent channel power: 70 dB
• Spurious emissions (typical): 0.25 µW
D Receiver
• Sensitivity (typical): –6 dBµ emf (20 dB SINAD)
• Squelch sensitivity (threshold, typical):
–6 dBµ emf
• Intermodulation rejection ratio: 65 dB
• Spurious response rejection ratio: 65 dB
• Adjacent channel selectivity: 65 dB
• Audio output power (at 10% distortion):
0.2 W (External) with an 8 ˘ load
0.9 W typical (Internal) with a
12 ˘ load at 1 kHz