America Inc. Fish Finder User Manual

ManualsBrandsIcom ManualsFish FinderMR-1000RTM

BASIC OPERATION

■ Checking the installation

Before turning the power ON, be sure all the connec-

tions are complete. The checklist at right may be help-

ful for necessary conﬁrmation.

D Checklist

q The 4 bolts securing the scanner unit must be ﬁrmly

tightened.

w Cabling must be securely attached to a mast or

mounting material, and must not interfere with the

rigging.

e Be sure waterproofing procedures are completed

on the system cable.

r The power connections to the battery must be of the

correct polarity.

t Be sure that the plugs at the rear of the display unit

have been connected correctly and securely.

(See p. 24 for details.)

CAUTION: Connect the scanner unit before turning the

power ON. Otherwise the magnetron inside the scanner

unit might be damaged.

■ Turning power ON/OFF

q Push [POWER]/[ ] to turn the power ON.

• The initial screen appears and warming up time is

counted down on the screen.

•

The magnetron inside the scanner unit warms up for 90 sec.

• [POWER]/[]does not function for 2 sec. after

the power is turned OFF.

w When the countdown is completed, the Standby

screen appears.

e Push [TX]/[ ] to start scanning and select

the Plan Position Indicator (PPI) screen.

• Targets and heading marker appear.

• The screen appears approx. 2 sec. after turning the

power on, when ‘AUTO’ is selected in the “TUNE” of the

VIDEO menu.

r Push [POWER]/[ ] to turn the power OFF.

(0.25)

T.VECT 6M

0.000NM

CURS

SOG17.7KT

H UP

000.0˚T

HDG253.4˚T

EBL1

EBL2

MOB

VRM1

VRM2

CURS 34 ˚ 37.72N

13 5˚ 34.42E

STBY

COMPASS

GPS