User's Guide

e. Step 4/5: Radar installation parameters

Screenshot 7: Installation parameters

: Key in the distance between the mounting mast and the centre of the vehicle movements.

For bidirectional measurements, this is the distance between the mounting mast and the

centre of the road (see above, Figure 1).

: Key in the height of the installation of the radar

Using this information, the software calculates the angle of inclination and the measurement range.

The software sends the inclination information to the antenna, which is adjusted automatically.

The calculation of the vertical angle is based on an angle of 90° between the mast and the road. If

the post is leaning or the road is inclined, use the “road inclination” function as shown in the “Step

3/5: Slope” section (see p. 17).

f. Step 5/5: Summary

Review the radar configuration parameters and click on “Send to radar” to configure the radar.