User's Manual
Table Of Contents
- Introduction
- What’s in the package?
- Register your ICON ProAudio product to your personal account
- Features
- Front Panel
- Rear Panel
- Top Panel
- Mac driver installation
- Mixer control panel(Mac)
- Windows driver installation
- ProDriver4(Windows)
- Mixer control panel(Windows)
- Settings (Sample rate and latency settings)
- ProDriver4 hosting rack(Windows)
- Hardware Connections
- Different types of microphone connection method diagram
- Specifications
- Services
19
8. VSC Music In 1/2 (Virtual) input level metering
Showing the WDM 1/2 output level (VSC music In 1/2).
9. VSC Out 1/2 (Virtual) output level metering
Showing the ASIO 1/2 VC output level (VSC Out 1/2).
10. VSC Music Out 1/2 (Virtual) output level metering
Showing the ASIO 1/2 VC output level (VSC music Out 1/2).
11. Loopback 1/2
Showing the ASIO loop-back 1/2 channel’s level metering.
12. Loopback 3/4
Showing the ASIO loop-back 3/4 channel’s level metering.
13. Loopback 5/6
Showing the ASIO loop-back 5/6 channel’s level metering.
14. Link switch
Switch to adjust both channels level simultaneously.
15. Mute switch
Switch to mute the corresponding channel.
16. “0dB” switch
Switch to instantly adjust the corresponding channel to “0dB” level.
17. Gain control fader
Slide to adjust the gain level for the corresponding channel.
18. Inputs & Outputs Matrix switches
Switch to turn On/Off the corresponding input channel route to the corresponding
output channel. The matrix is very useful and makes your inputs and outputs very
exible. You may route any of your input(s) to any output(s).
19. Mixer Presets
6 Mixer-Presets button slots are available for saving or loading your routing
channel settings.