User's Manual
Table Of Contents
- Introduction
- What's in the package?
- Register your ICON ProAudio product to your personal account
- Features
- Front Panel Layout
- Rear panel layout
- Getting Started
- Connecting your ikeyboard Nano controller
- Download the Windows driver from your “Personal User Page at www.iconproaudio.com”
- Installing iMapTM Software for Windows
- Assigning MIDI functions with iMapTM
- iMapTM ikeyboard Nano software panel
- Firmware upgrade
- Restore the factory default settings
- Reverse sustain pedal connector polarity
- Velocity curve
- Specifications
- Services
19
Restore the factory default settings
Reverse sustain pedal connector polarity
To restore your ikeyboard Nano settings to factory default, simply import the “Factory Default”
setting le into your ikeyboard Nano with the original setting of the iMap software.
There are two major type of sustain pedal on the market, they are having a reverse polarity and
thus will have the exact opposite reaction. You may adjust the polarity of your ikeyboard Nano
sustain pedal connector with the provided iMap (V1.03 or above). Please follow the below
instructions to adjust the polarity.
1.Launch iMap again and click “MIDI Devices” button to select ikeyboard Nano or USB Audio
Device form the pop-up menu
2.Click the ‘Sustain Pedal” logo and select “reverse” on the left-side pull down menu.
3.Click “Send Data” button to upload the settings to your ikeyboard Nano.
4.Close iMap software.