User's Manual
Table Of Contents
- Introduction
- What's in the package?
- Register your ICON ProAudio product to your personal account
- Features
- Front Panel Layout
- Rear panel layout
- Getting Started
- Connecting your ikeyboard Nano controller
- Download the Windows driver from your “Personal User Page at www.iconproaudio.com”
- Installing iMapTM Software for Windows
- Assigning MIDI functions with iMapTM
- iMapTM ikeyboard Nano software panel
- Firmware upgrade
- Restore the factory default settings
- Reverse sustain pedal connector polarity
- Velocity curve
- Specifications
- Services
9
Getting Started
Connecting your ikeyboard Nano controller
1. Connect the ikeyboard Nano to your Mac/PC via the USB port.
Choose a USB port on your Mac/PC and insert the wide (at) end of the USB cable. Connect
the cable’s small jack end to the ikeyboard Nano. Your Mac/PC should automatically “see”
the new hardware and notify you that it is ready to use.
2. Setup your DAW
Activate the ICON ikeyboard Nano controller in your DAW or MIDI software using “MIDI
Setup” or “MIDI Devices”.