User's Manual

105
Button "Bank <"
Shift eight channel up for all the faders except the master
fader
Button "Bank >"
Shift eight channel down for all the faders except the master
fader
Transport
Button “(Loop)“ Activate the loop function of the DAW
Button "<<" Activate the rewind function of the DAW
Button ">>" Activate the fast forward function of the DAW
Button "(Stop)" Activate the stop function of the DAW
Button "(Play)" Activate the play function of the DAW
Button "(Rec)" Activate the record function of the DAW
User dene function
Button "Shift" Additional function for different controls
Button "F1-F8" Self dene functions at Logic
View controls
Button "Global View"
Activate to enter into Global View mode. Use in conjuction with
the below 8 different views buttons to swicth between different
window views
Button "MIDI Tracks" Press to lauch the MIDI tracks window view
Button "Inputs" Press to lauch the Inputs window view
Button "Audio Tracks" Press to lauch the Audio tracks window view
Button "Audio Inst" Press to lauch the Audio Inst window view
Button "Aux" Press to lauch the Aux window view
Button "Busses" Press to lauch the Busses window view
Button "Outputs" Press to lauch the Outputs window view
Button "User" Press to lauch the User window view
Effect/Channel control
Button "Track"
Activate the "Track" function and use in conjuction with all the
knobs
Button "Pan/Surround"
"Press button: Activate Pan/Surround function
Rotate knob: Adjust pan/surround parameters
Press knob (enter): Center value"
Button "EQ"
"Press button: Lauch selected channel's EQ function panel
Rotate knob: Adjust EQ parameters
Press knob (enter): Reset to default value"
Button "Send"
"Press button: Activate Send function
Rotate knob: Adjust sending bus
Press knob (enter): Conrm selected bus "
Button "Plug-in"
"Press button: Lauch selected channel's Plug-in function panel
Rotate knob: Adjust plug-in parameters
Press knob (enter): Reset to default value"
Button "Instrument"
"Press button: Lauch selected channel's Instrument function
panel
Rotate knob: Adjust Instructment parameters
Press knob (enter): Reset to default value"
Automation
Button "Group" Activate the group function of the selected channel
Button "Read/Off" Activate the read function of the selected channel
Button "Write" Activate the write function of the selected channel
Button "Touch" Activate the touch function of the selected channel
Button "Latch" Activate the latch function of the selected channel