User's Manual

64
Shift + F7 = Open Transport Window
Shift + F8 = Open List Editors
Zoom &Cursor Arrows:
The Cursor Arrows (left, right, up, down) change selections or modify zoom in the ArrangeWindow.
In Assignment Modes they change theEncoder Knob parameter selection and scroll through
pages of parameters when editing plug-ins.
Press Zoom to activate zoom controls using the Cursor Arrows. Zoom controls only work in the
Arrange Window. When the Zoom button is illuminated, press Option + Cursor Arrows to adjust
individual track zoom.
In the Arrange Window, the up/down Cursor Arrows select the previous/next channel.
In the Mixer Window, the left/right Cursor Arrows select the previous/next channel.
(On Platform M+, Zoom is managed by toggling the Zoom buttons and turning the jog wheel.)
Channel Bank Options:
Bank up/down = Scroll through tracks in the project in xed blocks of 8
Channel up/down = Step the current bank by onetrack
Option +Bank up/down = Scroll bank to rst or last track
Option +Channel up/down = Scrollbank to rst or last track
If expansion units are connected, bank left/right scroll by the total number of fader banks.
Global View:
While in the Mixer Window, press Global View. Now use the Function buttons to display channel
strips in the project by category. Hold multiple Function buttons to display multiple types of channel
strips. Press Global View to restore normal view.This is useful for mixing or editing large sessions,
for example projects with complex signal routing or advanced MIDI setups.
F1 = Midi Tracks
F2 = Inputs
F3 = Audio Tracks
F4 = Instrument Plug-ins
F5 = Aux
F6 = Bus
F7 = Outputs
<<<<<<<<< Encoder Knob Assignment>>>>>>>>>
Press one of the Assignment buttons to select the category of parameters currently assigned
to the Encoder Knobs. Use the Cursor Arrows left/right to select a parameter and up/down to
navigate the channel strip position. When the Encoder Knobs make a selection from a list, such
as plug-in or send destination, press the encoder to conrm the selection.
Assignment Modes:
Track = Activates Track Assignment, view and edit one selected parameter:
Volume, Pan, Format, Input, Output, Automation, Group, Custom (Automation Parameter)