User's Manual
Table Of Contents
- Introduction
- What's in the package?
- Register your ICON ProAudio product to your personal account
- Features
- Top Panel Layout
- Rear Panel Layout
- Getting Started
- Connecting Your QconPro X Controller
- Cubase
- Nuendo
- Logic Pro
- Samplitude
- Bitwig
- Reason
- Reaper
- Studio One
- Ableton Live
- Pro Tools
- Download the Mac iMap from your Personal
- User Page at www.iconproaudio.com
- Installing iMapTM Software for Windows
- Assigning DAW Mode (Mackie Control/HUI) or Defining MIDI Functions with iMapTM
- Assigning DAW Mode (Mackie control/HUI) Using iMapTM
- Assigning MIDI Messages in User-Defined Mode Using iMapTM
- Control Element Setup in User-Defined Mode
- Other Functions in iMap™
- Firmware upgrade
- Restore the factory default settings
- Specifications
- Services
- AppendixA
- Cubase
- Logic Pro X
- Pro Tools HUI
- Ableton Live 10
- AppendixB
- Cubase
- Logic Pro X
- Pro Tools HUI
- Ableton Live 10
- AppendixC
- Cubase
- Logic Pro X
- ProTools HUI
- Ableton Live 10
68
The X/Y parameters are like the coordinates of a sound source relative to the listener, where 0, 0
is centered and coordinates can be set between +/-1000on the grid.
<<<<<EQ>>>>>
EQ Assignment Mode:(EQ)
Press EQ to open (or add) theLogic Channel EQ. EQ Assignment Modecan only edit a standard
Logic Channel EQ or Logic Linear Phase EQ. Press Shift+Muteto toggle EQ band bypass.Press
Flip to control EQwith the faders and toggle band bypass with Mute.
EQ Assignment Shortcuts
:
HoldEQto display the shortcut menu. Here you can select which parameter will appear on the LCD
display and can be edited by the Encoder Knobs in EQ Assignment Mode.
Encoder Knob 1 or F1 = Frequency
Encoder Knob 2 or F2 = Gain
Encoder Knob 3 or F3 = Q-Factor
Encoder Knob 4 or F4 = Band Bypass
Encoder Knob 5 or F5 = --
Encoder Knob 6 or F6 = Activates EQ Focus Mode
Encoder Knob 7 or F7 = Activates Freq/Gain Mixer Mode
Encoder Knob 8 or F8 = Activates Freq/Gain Channel Mode
EQ Focus Mode:
(EQ- EQ)
Press EQa second time to open the Logic Channel EQand editmultiple EQ parametersfor the
selected channel. The left/right Cursor Arrows browse pages of EQ bands.
Encoder Knob 1 = Band 1 Frequency
Encoder Knob 2 = Band 1 Gain
Encoder Knob 3 = Band 1 Q-Factor
Encoder Knob 4 = Band 1 Bypass
Encoder Knob 5 = Band 2 Frequency
Encoder Knob 6 = Band 2 Gain
Encoder Knob 7 = Band 2 Q-Factor
Encoder Knob 8 = Band 2 Bypass
Freq/Gain Mixer Mode:(EQ+ F7)
This is the place to efciently manage frequency separation between instruments for a mixdown.
After the rough mix, use this mode to quickly assign tracks appropriate real estate on the sonic
stage. The LCDdisplay shows channel strip names andfrequency of the selected EQ band. The
Encoder Knobschange the EQ frequency, and the faders adjust EQ Gain.Mute toggles bypass of
the selected EQ band. Cursor Arrows up/down select the EQ band.
Freq/Gain Focus Mode:(EQ+ F8)
Edit frequency and gain for all 8 EQ bands on the selected channel strip. This offers very quick
access to powerfully adjust the frequency content of a track, optimal for rough mix. Turning
anEncoder Knob changes the EQ frequency, and the faders adjust EQ Gain. Each channel Mute
toggles bypass of its EQ band. Press channel Select to edit the EQ on that track.