User's Manual
Table Of Contents
- Introduction
- What's in the package?
- Register your ICON ProAudio product to your personal account
- Features
- Top Panel Layout
- Rear Panel Layout
- Getting Started
- Connecting Your QconPro X Controller
- Cubase
- Nuendo
- Logic Pro
- Samplitude
- Bitwig
- Reason
- Reaper
- Studio One
- Ableton Live
- Pro Tools
- Download the Mac iMap from your Personal
- User Page at www.iconproaudio.com
- Installing iMapTM Software for Windows
- Assigning DAW Mode (Mackie Control/HUI) or Defining MIDI Functions with iMapTM
- Assigning DAW Mode (Mackie control/HUI) Using iMapTM
- Assigning MIDI Messages in User-Defined Mode Using iMapTM
- Control Element Setup in User-Defined Mode
- Other Functions in iMap™
- Firmware upgrade
- Restore the factory default settings
- Specifications
- Services
- AppendixA
- Cubase
- Logic Pro X
- Pro Tools HUI
- Ableton Live 10
- AppendixB
- Cubase
- Logic Pro X
- Pro Tools HUI
- Ableton Live 10
- AppendixC
- Cubase
- Logic Pro X
- ProTools HUI
- Ableton Live 10
9
switch the function of these faders to change other settings. They are all touch
sensitive which allows you to override automation the moment you touch a fader.
Also, they are motorized; they will automatically move to reect the current level
of the selected channels in your DAW application. Any automation recorded in a
project will be reected by the fader positions. Any parameter adjustments made
with the fader will be displayed directly above on the LCD display (upper LCD).
3. Master fader
This 100mm motorized fader operates the same as the other 8 faders. It controls
your DAW software's master channel fader. Any parameter adjustments made
with this fader will be displayed directly above on the LCD display (upper LCD).
Note: Except Pro Tools – Pro Tools software is designed in such a way that the
fader next to your last channel fader always acts as the master channel fader.
4. Channel level metering (mono)
The 12-led showing the associated channel level.
5. Master channel metering (stereo)
The 12 x 2-LCD showing the master channel level.
6. Dual Function Encoders with Multi-Colour Surround LED
The dual functioned encoder acting as a push-button and a rotary control.
When an encoder is pressed, it may be used to change modes of operation
or to change what appears in the display above the channel strips. When an
encoder is rotated, depending on its assigned function, it can be used to adjust
a channel’s pan, send level, or plug-in parameters.
6a. Encoder LED
The 11-LED surrounding the encoder lights up to indicate the relative position of
the rotation without having to look at your computer. On Cubase, the colour of
the surround LED will change according to the controlling parameter.
7. Time display
This display shows the time location of your project in either SMPTE or BBT
format.
8. Control buttons
8a) Recording channel control buttons section
REC buttons - Activate and deactivate the recording state of the
associated channel. The switch will light red when the channel is armed.
SOLO buttons - Turn On and Off the solo state of the associated channel.
The switch will light green when the channel solo state is on and other
channels will be muted. You could solo multiple channel by pressing SOLO
buttons on additional channels.
3b.