User Guide

 Click the appropriate network.
 Type the password in the available field, then click Connect.
 The network selected appears at the top of the list, with an indication the time clock is “connected” to the
wireless network.
ETHERNET CONNECTION
Connect your time clock directly to your network for a faster and more reliable connection than wireless can offer.
 Plug one end of the Ethernet cable, provided in the package, to an available port on your router, DSL
modem or switch.
 Connect the other end to the Ethernet port on your time clock.
 Plug the time clock into the power. Wait for the time clock to fully boot up, it will state Enter ID Number.
 Enter Supervisor Mode at your employee time clock terminal.
 Press on the time clock.
 Enter your security code. The default security code is 00 00 00.
Note: If there is a wireless network in range, you’ll be prompted to connected to the wireless network.
Press Clear to cancel and move to the next step.