Pad 12 velocity-sensitive trigger pads with X/Y touchpad USB MIDI controller.
Pad Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Contents 1 Features 2 Front Panel Layout 3 Side Panel Layout 3 Getting Started Connecting your iPad Controller system Controller Features and Settings Trigger Pads X/Y Touchpad Artist buttons Effect buttons: Hold / Roll and Flam Fader 4 4 4 5 5 5 5 Installing iMapTM Software for Mac OSX 6-7 Installing iMapTM Software for Windows 8-9 Assigning MIDI functions with iMapTM 10 iMapTM iPad software panel 10-12 Velocity Curves 12 Restore the factory default settings 13 Daisy Chain with iPad o
Introduction Pad Thank you for purchasing the ICON iPad USB MIDI controller. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right. In these pages, you'll find a detailed description of the features of the iPad, as well as a guided tour through its front and side panels, step-by-step instructions for its setup and use, and full specifications. You'll also find a warranty card enclosed.
Features 1 2 3 4 Artist Pad Flam Hold Roll p7 p8 p9 p 10 p6 p 11 p 12 Pad f1 p5 Main features include: Extremely compact and designed to match the MacBookTM 12 integrated velocity-sensitive trigger pads send MIDI notes or control data Multi velocity curves available for selection X/Y touchpad MIDI CC assignable fader to control CC such as volume "Artist" button for customizing 4 scenes for instant control of multiple applications "Hold", "Roll" and "Flame" feature buttons are build-in 2xU
Front Panel Layout 4 1 2 5 3 4 6 7 Pad Flam Artist Hold Roll p5 p6 p 11 p 12 Pad 3 p7 f1 p8 2 p 10 p9 1 1 12 integrated velocity-sensitive trigger pads 12 integrated velocity-sensitive trigger pads send MIDI notes or control data 2 X/Y TouchPad Assignable X/Y touchpad allows you to make various controls. 3 Assignable Fader This programmable fader slides up and down to adjust linear MIDI parameters such as volume.
Getting Started Connecting your iPad controller system 1 Connect the iPad to your Mac/PC via the USB port. a b 1394 USB1 USB2 Diagram 1 2 Pad Choose a USB port on your Mac/PC and insert the wide (flat) end of the USB cable. Connect the cable's small jack end to the iPad. Your Mac/PC should automatically "see" the new hardware and notify you that it is ready to use.
Pad X/Y Touchpad The X/Y Pad allows you to manipulate any software function that allows visual/tactile user control and is enabled by the manufacturer. The pad will trace your finger movements, enabling you to create filter envelopes, waveforms or velocity curves, or to set pan, volume, effects or any other linear functions available in the software. Look in your software owner's manual for these options. There will be special instructions for using touchpads.
Installing iMapTM Software for MAC OSX Please follow the procedures below step-by-step to install your iMapTM software to Mac OS X 1 Turn on your MAC.
Installing iMapTM Software for MAC OSX(continues) 6 Input Administrator information Pad To install iMapTM software, you need to input administrator user information, please input the name and password of administrator then click "Install" to continue. Diagram 5 7 Installation finished Click "Close" to complete the iMapTM software installation.
Installing iMapTM Software for Windows Please follow the procedures below step-by-step to install your iMapTM software. 1 Turn on your PC. 2 Insert the Utility CD in your CD-Rom Pad After you have inserted the CD into your CD-Rom, an installation screen should appear as shown in diagram 1; click "iMapTM installation".
Installing iMapTM Software for Windows(continues) 6 Create a shortcut on your desktop Pad Please untick the box if you do not want to place a shortcut icon on your desktop for iMapTM, otherwise click "Next" Diagram 5 7 TM iPad started to install The iMapTM installation has now started, wait for it to finish. Then click "Finish" Diagram 6 8 Installation finished Click "Finish" to complete the iMapTM software installation.
Assigning MIDI functions with iMapTM You can use iMapTM to assign the MIDI functions of your iPad easily. Please launch the iMapTM software, a device selector screen will appear as shown in diagram 1. Then click the "iPad" button. Note: If your iPad is not connected to your Mac/PC, a message of "There are no MIDI input devices" will appear. Please connect iPad to your Mac/PC with the provided USB cable.
iMapTM iPad software panel(continues) Pad 8 2 3 4 5 6 11 1 7 9 10 11 12 13 4 Assign the MIDI channels to the Y-touchpad Select your desired MIDI channel from 1-16 in the pull-down menu for the Y-touchpad. 5 Assign the CC value to the Y-touchpad Select your desired CC number from 0-127 in the pull-down menu for the Y-touchpad. 6 Assign the MIDI channels to the fader Select your desired MIDI channel from 1-16 for the pitch bend touch pad.
iMapTM iPad software panel(continues) 8 1 2 3 Pad 4 5 6 12 7 9 10 11 12 13 "Send Data" button Click this button to upload the iMapTM software settings to your iPad via USB connection. (Note: You must have connected your iPad to your Mac/PC, otherwise the settings upload will not be successful.) 13 "MIDI Devices" button Click this button, a MIDI device select window will appear as shown in diagram 1. Please select "ICON iPad" for the MIDI Out Devices.
Restore the factory default settings By holding down the buttons "Artist ", "Artist " and "Hold" together, the settings of the iPad will return to its factory default condition. Pad Daisy Chain with iPad or any i-series controllers You may daisy chain up to 3 units of iPad or any i-series controllers. 1 Connect the first unit of iPad to your Mac/PC via the USB port. Choose a USB port on your Mac/PC and insert the wide (flat) end of the USB cable and the other small end (B-type USB pack) to iPad.
Specifications Connector: To computer USB connector (mini B type) To i-series controller USB connector (standard type) USB bus power Current consumption: 100mA or less Weight: 0.62kg (1.36lb) Dimensions: 325(L) X 99(W) X 20(H) 12.78"(L) x 3.78"(W) x 0.
Pad Appendix A General MIDI Controller Numbers (MIDI CC'S) 15
Services If your iPad needs servicing, follow these instructions. 1. Ensure the problem is not related to operation error or external system devices. Pad 2. Keep this owner's manual. We don't need it to repair the unit. 3. Pack the unit in its original packaging including end card and box. This is very important. If you have lost the packaging, please make sure you have packed the unit properly. ICON is not responsible for any damage that occurs due to non-factory packing. 4.
www.icon-global.com info@icon-global.