Contents Introduction What's In the package Ne Camp Features Front Panel Layout Rear Panel Layout Operating the Neo Amp Neo Amp Connections Stacking the Neo Camp Specifications Services ha WON a 10 ATE
dO Amp “Tha hiring Sash wth arrowhead symbol whe an /DIET— che trier dun mullah pou Sor do voltage rrp gs med at tha na fo emcee sng ars tartaric (weg) tint ve ree rear Ge sandstone fr dun ord nn ii Foot ott drat a pre) reds ord torsion resurgent papa | Important Safety instructions 1. Read all manufacturer's wakings and instructions 2. Do not use this apparatus near water. 3. Clean only with dry cloth. 4.
Introduction Thank you for purchasing the ICON Neo Amp 4 Channel Stereo Headphone Amp. In these pages, you'll find a detailed description of all Neo Amp features, a guided tour through its front and rear panels, step-by-step instructions for its setup and use, and full specifications. You'll also find a warranty card in this package.
Features * Four channel steerage headphone amplifier * Maximum output power on each channel regardless of different headphone Impedance * Four stereo headphone outputs * Individual volume control for each headphone output * Stereo 1/4 inch input connector * Rugged aluminum extrusion chassis * Large rubber bumper feet * 18 Volt AC adapter included * Three year extended warranty
Front Panel Layout ( HEADPHONE 1 1/4" output for connecting headphone 1. @ HEADPHONE 2 1/4" output for connecting headphone 2. ® HEADPHONE 3 1/4" output for connecting headphone 3. ® HEADPHONE 4 1/4" output for connecting headphone 4. ® LEVEL Control knob used to adjust the output level of Headphone 1. ® LEVEL Control knob used to adjust the output level of Headphone 2. @ LEVEL Control knob used to adjust the output level of Headphone 3. ® LEVEL 4 Control knob used to adjust the output level of Headphone 4.
Rear Panel Layout @ AC POWER ADAPTER INPUT Connect the supplied power adapter here. @ STEREO INPUT 1/4" TRS (TIP/RING/SLEEVE) connector to input main stereo signal.
Operating the Neo Amp The basic procedure for setting up and using your Neo Amp is simple and takes only a few minutes. Remove all packing materials (save them in case of need for future service) and check to make sure that you have the supplied AC power adapter. IMPORTANT NOTE: Before you connect your headphones, be sure io double check all level controls are muted all the way down (fully counter clockwise position). The Neap is small, but powerful.
dO Amp Operating the Neo Amp Repeat the previous step for all Channels that have headphones connected, making sure to start the LEVEL knob completely counterclockwise and then slowly raising it until the desired level is achieved. If you have connected different models of headphones to the various Channel Headphone jacks, you may find that some require more gain than others to achieve the same volume. This kind of disparity will occur if the various headphones have different impedance.
Neo Amp Connections HEADPHONE IMPEDANCE AND SENSITIVITY RATINGS Virtually all headphones that terminate in a stereo 1/4" plug can be used with the Ne Camp Headphone Amplifier. This chart provides a partial listing of some of the more popular models, along with their impedance and sensitivity ratings.
Stacking Neo Amp Stacking the Neo Amp You can stack one Neo Amp o r any other ICON Neo Series gears on top = < of each other by simply lining up the bumpers.
Specifications Input Impedance: Max Input Level: Input Connectors: Outputs: Output Impedance: Max Gain: S/N Ratio: THD: IMD (TEMPTER; Power: Dimensions: Weight: 100K ohm unbalanced +19 dBV Stereo 1/4" TRS Phone jack 4 Stereo 1/4" TRS Phone jack 100 ohm each output 20 dB/Channel >90 dB < 0.05% < 0.05% VAC adapter 7.87"L x 4.88"W x 2" H (200Lx124Wx51H mm) 1.
dO Amp Services If your Neo Amp needs servicing, follow these Instructions. 1. Ensure the problem is not related to operation error or textual system devices. 2. Pack the unit in its original packaging including end card and box. This is very important. If you have lost the packaging, please make sure you have packed the unit properly. ICON is not responsible for any damage that occurs due to non-factory packing. 3.