Operation Manual

20
5
MEMORY CHANNELS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Memory bank setting
The IC-R6 has a total of 22 banks (A to R, T, U, W and Y).
Regular memory channels 000 to 1299 can be assigned to
any desired bank, for easy memory management.
q
Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• The “
” icon and memory channel number blink.
w Rotate [DIAL] to select a desired memory channel.
e
While holding down [MODE], rotate [DIAL] to select the
“BANK” item.
• The bank group and channel number are displayed if the select-
ed memory channel has already been assigned to a bank.
• The “BANK” item can also be selected by pushing [MODE]
repeatedly.
[DIAL]
After
released.
• After releasing [MODE], “-- -- -- --” is displayed instead of the
frequency display, and only the “
” icon blinks.
r While holding down [BAND], rotate [DIAL] to select a
desired bank group.
• Bank groups A to R, T, U, W and Y are selectable.
• The bank groups can also be selected by repeatedly pushing
[BAND].
[DIAL]
Bank group
t Rotate [DIAL] to select a desired bank channel number.
• Only vacant bank channel numbers are displayed.
[DIAL]
Bank channel
y Hold down [S.MW](V/M) for 1 second to assign the chan-
nel to the bank.
• Return to the previous screen before entering the select memory
write mode.