Operation Manual

27
5
MEMORY CHANNELS
New2001 New2001
The contents of programmed memory channels can be
erased or transferred to other memory channels.
INFORMATION: Even if the memory bank contents are
erased, the memory channel contents still remain pro-
grammed.
q
Select a desired bank contents to be transferred or erased
from the bank.
➥ Push [V/M] to select the memory mode.
➥ While holding down [BAND], rotate [DIAL] to select a
desired memory bank group.
➥ Rotate [DIAL] to select the bank channel.
w
Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• Do not hold down [S.MW](V/M) for more than 2 seconds.
Otherwise the bank contents will be copied to the VFO.
Hold down for 1 sec.
• The original memory channel number is automatically dis-
played, then the “
” icon and the memory channel number
blink.
e While holding down [MODE], rotate [DIAL] to select the
“BANK” item.
• Pushing [MODE] repeatedly also selects the “BANK” item.
r While holding down [BAND], rotate [DIAL] to select a
desired bank group to transfer.
Or, select the “-- -- -- --” display when erasing the contents“-- -- -- --” display when erasing the contents-- -- -- --” display when erasing the contents” display when erasing the contents display when erasing the contents
from the bank.
• If “-- -- -- --” is selected in this step, skip step“-- -- -- --” is selected in this step, skip step-- -- -- --” is selected in this step, skip step” is selected in this step, skip step is selected in this step, skip step t, and go to step y.
[DIAL]
To transfer the bank contents
in bank E.
To erase
t Rotate [DIAL] to select a desired bank channel.
y
Hold down [S.MW](V/M) for 1 second to erase or transfer
the bank contents.
■ Erasing/transferring bank contents