Operation Manual

35
6
SCAN OPERATION
New2001
Memory channels can be set to be skipped for a memory
skip scan. In addition, memory channels can be set to be
skipped for both a memory skip scan and a frequency skip
scan. These are useful to speed up the scan time.
q
Select a memory channel:
➥ Push [V/M] to select the memory mode.
➥
Rotate [DIAL] to select a desired channel to be a skip
channel/frequency.
w
Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
e
Push [MODE] repeatedly to select the “SKIP” item.
• While holding down [MODE], rotating [DIAL] can also select
the “SKIP” item.
[DIAL]
• Skip setting
r While holding down [FUNC], rotate [DIAL] to select the
skip option from “SKIP,” “PSKIP” or “OFF,” for the selected
channel.
• SKIP : The channel is skipped during a memory or bank scan.
• PSKIP : The channel is skipped during a memory/bank scan.
The programmed frequency is skipped during a VFO
scan, such as a programmed scan.
• OFF : The channel or programmed frequency is scanned dur-
ing any scan.
t Hold down [S.MW](V/M) for 1 second to store the skip status.
• The “SKIP” or “PSKIP” icon appears, according to the skip
selection in step r.
• Skip channel setting • Program skip setting
“SKIP” appears “PSKIP” appears
✔ CONVENIENT!
The skip setting can also be set using the following steps, for
easy setting.
q
Select a desired memory channel to be set as a skip
channel/frequency.
w
While holding down [FUNC], push [ ](V/M) to select the
skip status from “SKIP,” “PSKIP” or “OFF
(no indication).”
■ Skip channel/frequency setting