Operation Manual

45
New2001
SET MODE
9
■ General
The Set mode is used for programming infrequently changed
values or options of the receiver’s functions.
In addition, the IC-R6 has the Expand set mode which is
used for programming even more infrequently changed val-
ues or options of the functions. When turning the Expand set
mode OFF, only half of the Set mode items are displayed,
for simple operation.
D Set mode entering and operation
q Hold down [SET](TS) for 1 second to enter the Set mode.
w
Rotate [DIAL] to select a desired item.
e
While holding down [FUNC], rotate [DIAL] to select a
desired value or option.
r
Push [SET](TS) to exit the Set mode, or repeat steps w
and e to set other items.
[DIAL]
D Expand set mode ON/OFF and operation
q Hold down [SET](TS) for 1 second to enter the Set mode.
w
Rotate [DIAL] to select the “EXPAND” item.
e While holding down [FUNC], rotate [DIAL] to turn the
Expand set mode ON or OFF.
Expand set mode OFF
Expand set mode ON
r Rotate [DIAL] to select a desired item.
t
While holding down [FUNC], rotate [DIAL] to select a
desired value or option.
y
Push [SET](TS) to exit the Set mode, or repeat steps r
and t to set other items.