Operation Manual

56
9
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
56
9
10
D CI-V address (CIVADR)
To distinguish individual equipment, each CI-V transceiver/
receiver has its own Icom standard address as a hexadeci-
mal number. The IC-R6’s address is “7E.”
When 2 or more IC-R6 receivers are connected with an op-
tional CT-17
ci-v level converter, set a different address
for each of them in the range “01” to “DF.” (default: 7E)
See page 64 for more details.
D CI-V baud rate (CIVBAU)
Sets the baud rate from 300, 1200, 4800, 9600, 19200 bps
or AUTO. When “AUTO” is selected, the baud rate is auto-
matically set according to the connected controller setting or
other Icom CI-V radio setting. (default: AUTO)
D CI-V transceive (CIVTRN)
CI-V transceive operation is possible even if the IC-R6 re-
ceiver is connected to an Icom CI-V radio. When set to “ON,”
the frequency and the operating mode of the IC-R6 auto-
matically change to those of the connected radios, and vice
versa. (default: ON)