Operation Manual

65
11
CONTROL COMMAND
New2001
Cmd.
Sub
Cmd.
Data Description
00 see the right Send frequency data for transceive
01 02, 05, 06 Send mode data for transceive
02=AM, 05=FM, 06=WFM
03 see the right Read operating frequency
04 02, 05, 06 Read operating mode
02=AM, 05=FM, 06=WFM
05 see the right Set operating frequency
06 02, 05, 06 Operating mode selection
02=AM, 05=FM, 06=WFM
11 00/10 Send/read the attenuator function
setting
00=OFF, 10=ON (approx. 10dB)
12 00/01 Send/read ANT selection
0.495 to 1.620 MHz band:
00=EXT, 01=BAR*
*“BAR” can only be selected in AM mode.
Other frequency band:
00=EXT, 01=EAR
14 01 see p. 66 Send/read the volume level
03 see p. 66 Send/read the squelch level
15 01 00/01 Read the squelch status
00=Squelch close, 01=Squelch open
02 see p.66 Read the S-meter level
16 43 00, 01, 02 Send/read the tone squelch setting
00=OFF, 01=TSQL, 02=TSQL-R
4B 00, 01, 02 Send/read the DTCS squelch setting
00=OFF, 01=DTCS, 02=DTCS-R
Cmd.
Sub
Cmd.
Data Description
16 4C 00/01 Send/read the VSC function setting
00=OFF, 01=ON
19 00 Read the receiver ID
1A 00 00/01 Send/read the AF filter setting
00=Filter OFF, 01=Filter ON
1B 01 see p. 66 Set/read TSQL tone frequency
02 see p. 66 Set/read DTCS code with polality
D Data content description
• Receive frequency (Command: 00, 03, 05)
q
XX X X X
w e
X
r t
XX XX
10 Hz digit: 0, 5* (depending on 100 Hz) 1 Hz digit: 0 (Fixed) 1 kHz digit: 0–9 100 Hz digit: 0, 2, 5, 7 100 kHz digit: 0–9 10 kHz digit: 0–9 10 MHz digit: 0–9 1 MHz digit: 0–9 1000 MHz digit: 0, 1 100 MHz digit: 0–9
* 0: When 100 Hz digit is 0 or 5, 5: When100 Hz digit is 2 or 7
When the tuning step is selected 8.33 kHz (Air band),
100 Hz digit, 10 Hz digit and 1 Hz digit can be set 3 or 6.
■Command table