Operation Manual
New2001
q
w
iR6
VFO and memory mode selection
POCKET GUIDE
Push [V/M] to toggle between the
VFO and the memory mode.
Receive mode selection
Push [MODE] repeatedly to
select a desired mode.
Audio level setting
Push [Y] to increase the audio
level, push [Z] to decrease it.
Squelch level setting
While holding down [SQL],
rotate [DIAL] to set the squelch
level.
Frequency band selection
Push [BAND] repeatedly, or hold
down [BAND], rotate [DIAL] to
select a desired frequency band.
Tuning step selection
Push [TS], then rotate [DIAL] to
select a desired tuning step.
•
Push [TS] again to return to the
previous screen.
Key lock function
While holding down [FUNC], push
[ ](BAND) for 1 sec. to toggle
the key lock function ON or OFF.
• “ ” appears when the lock function
is in use.
Frequency setting
Push [V/M] to select the VFO
mode.
Rotate [DIAL] to set a desired
receive frequency.
q
w
Memory channel selection
Push [V/M] to select the
memory mode.
Rotate [DIAL] to set a desired
memory channel.
• While holding down [FUNC], rotate
[DIAL] changes the memory
channel in 10 channel steps.
q
w
e
Memory bank channel selection
Push [V/M] to select the
memory mode.
Push [BAND] repeatedly, or
while holding down [BAND],
rotate [DIAL] selects a desired
bank.
Rotate [DIAL] to select a
desired bank channel.
Attenuator function
While holding down [FUNC],
push [ ](SQL) to toggle the
attenuator ON or OFF.
• “ATT” appears when the attenua-
tor function is in use.
80
16
POCKET GUIDE
Important operating instructions are summed up on this and the following
page for your simple reference.
By cutting along the line and folding on the dotted line, it will become a
card sized operating guide which can easily be carried in a card case or
wallet, etc.
q Cut w Fold
e Complete
<CUT HERE>