Operation Manual

3
Install the iFit app
Pair, set up, and sync the watch with your iOS device (iPhone® 4s and later) or your Android device (Android 4.3 and later)
that supports BLUETOOTH® 4.0 wireless technology.
On your iOS or Android device, open the App Store℠ or the Google Play™ store, search for the free iFit app, and then install
the app on your device. Make sure that the BLUETOOTH option is enabled on your device.
Set the Time On the Watch
The first time you use the watch, set the time. First, gently pull the crown away from the dial (see the diagram on page 6).
Next, turn the crown until the dial displays the correct time. Then, push the crown back toward the dial.
Wake the Watch From Shipping Mode
The first time you use the watch, press and hold the bottom button for 1 second. After approximately 3 seconds, the watch will
exit shipping mode and the hands will begin to move.
Pair, Set Up, and Sync the Watch
Open the iFit app and follow the instructions to set up an iFit account and pair the watch to the iFit app on your device.
As part of the pairing process, press and hold the top button for 3 seconds (see the diagram on page 6). The red LED on the
dial will flash. Then, in the iFit app, select the watch from the list of discoverable devices.
If the pairing is successful, the LED on the dial will flash green. After it is paired, the watch will sync automatically whenever
the iFit app is open and the BLUETOOTH option is enabled on your device. You can also sync the watch manually in the iFit
app.
Follow the instructions in the iFit app to customize settings for the watch, enter and track information, and set goals.
Install The iFit App And Set Up The Watch