Operation Manual

4
Battery Life
The watch contains a rechargeable lithium-ion battery. With normal use, a fully charged watch will run for approximately 7
days before needing a charge.
When the battery level is at 15 percent, both the red and green LEDs will flash for 5 seconds to notify you that the battery
needs to be charged. This will continue to happen every 5 minutes until the battery is drained completely or until you charge
the watch. IMPORTANT: Make sure that the watch syncs to the iFit app when the battery level is low; the data recorded
on the watch will be deleted when the battery level is at zero percent.
Charge the Watch
To charge the watch, first connect the USB cable to the
charger.
Next, attach the charger to the watch by aligning the contacts on the back
of the watch with the pins on the charger. Then, insert the watch into the
charger.
Once the watch and the charger are snapped together, plug the charger
into a USB port on your computer. It will take approximately 4 to 8 hours for
the watch to charge completely.
Note: To charge the watch more quickly, plug the charger into a USB wall
adapter (not included) or a USB car charger (not included).
While the watch is charging, the red LED on the dial will flash. When the
watch is fully charged, the green LED on the watch will light until the
charger is unplugged.
Charge The Watch