Operation Manual

Congratulations for selecting the revolutionary iFit
®
Module.
Your iFit Module will help you to create and manage a personal
fitness program designed to make your fitness goals a reality.
QUESTIONS?
If you have questions after reading this manual and configuring
your iFit Module, PLEASE DO NOT CONTACT THE STORE.
Please go to [e-mail], send an e-mail to
[e-mail], call 0330 123 1045, or write to the
address below:
ICON Health & Fitness, Ltd.
Unit 1D, The Gateway
Fryers Way, Silkwood Park
OSSETT
WF5 9TJ
UNITED KINGDOM
OPERATING REQUIREMENTS
To configure and use your iFit Module, you will need the following:
• A PC or Macintosh computer with a USB port
•
A wireless 802.11b router with SSID broadcast enabled (hidden
networks are not supported)
• An Internet connection (a broadband connection is
recommended; performance depends on connection speed)
• An iFit.com membership
Note: The iFit Module supports unsecured and secured (WEP,
WPA™, and WPA2™) encryption.
HOW TO CONFIGURE YOUR IFIT MODULE
Follow the steps below to configure your iFit Module.
IMPORTANT: To complete the configuration process, you will
need to know your network SSID (network name), network
encryption type, and network password.
1. Plug the included USB cable into the port on your iFit Module.
Plug the other end of the USB cable into a USB port on your
computer.
2. Turn on your computer, launch your Web browser, and go to
www.iFit.com/install.
3. Follow the instructions on your computer screen. When you
have completed the process, the words, “Device has been suc-
cessfully configured” will be displayed on your computer screen.
4. Unplug the USB cable from your computer and from your iFit
Module.
5. Unplug the power cord of your fitness equipment. Insert the iFit
Module into the iFit port on the console of your fitness
equipment.
Note: If you have questions after following these instructions, go to
www.iFit.com/support for assistance. To use the iFit Module, see
your fitness equipment user’s manual or go to www.iFit.com/support.
Model No.
EXIF09-INT.0
1
User’s Manual
iFit
Module
USB
Cable
5
iFit
Module