User manual

27
3.0 General setting to the keyboard
2.1 Control Mode
Mackie Control: Select “Mackie Control” for Mackie control protocol
HUI: Select “HUI” for HUI control protocol
User Dened: Set your own midi settings for all the controllers
 (Tip: Please refer to Appendix A for Mackie Control and HUI protocol functions.)
 (Note: In “Mackie Control / HUI” mode, settings are xed and not changeable.)
2.2 User dened mode (Advance user)
 If you would like to assign your own midi mapping, select “User Dened” mode at the
control mode drop down menu. To assign a control, select it by clicking it and assign a
different midi message by the three drop down menus. The table below shows the different
types of midi messages and their changeable parameters.
MIDI Message Type Channel Parameters
Note 0 to 16 -1(C) to 9(G)
CC 0 to 16 0 to 127
3.1 “Save le” button
 Click this button to save your current settings for the ikeyboard X. The le is an
 “ikeyboard X” le.
3.2 “Load le” button
 Click this button to load a previously saved “. ikeyboard X” setting le for your ikeyboard X.
3.3 “Send Data” button
 Click this button to upload the iMap
TM
software settings to your ikeyboard X via USB
connection.

 (Note:You must have connected your ikeyboard X to your Mac/PC, otherwise the settings
upload will not be successful.)
3.2
3.5
3.4
3.1 3.3
Section 3