User Manual

21
Device Menu
Switch Devices – Brings up the Device Selection dialog, allowing you to choose a
different iConnectivity interface to be configured.
All the following have a confirmation dialog, so you have a chance to cancel before the
operation:
Save Current Settings – Write the current iConfig settings to the iConnectAUDIO2
+
’s
flash memory.
Restore Settings from Memory – Transfers the current snapshot from the
iConnectAUDIO2
+
’s flash memory into iConfig.
Restore to Factory Defaults – Removes all user changes to the iConnectAUDIO2
+
’s
configuration.
Reset – All digital devices can get “confused” and require resetting.
Reset to Bootloader Mode – When the device restarts it will be in Bootloader Mode,
ready to receive firmware changes. This lets you load specific firmware files.
Upgrade Firmware – Checks whether your firmware is current. If not, it installs it from
www.iConnectivity.com. iConfig checks for updates each time it's launched, and can
install them automatically if you give permission.
Reread Settings – Redraws the application screen.