User Manual

23
Audio Patchbay and Audio Mixer
The Audio Patchbay and Audio Mixer are powerful tools for configuring the
iConnectAUDIO2+ interface. They allow you to:
- Define the routing of any analog or digital inputs to any analog or digital outputs.
- Route any input to multiple outputs.
- Combine multiple inputs and route them to a single output using internal mixers.
The easiest way to understand the Audio Patchbay and Audio Mixer is just to follow this
short tutorial.
iConfig's Audio Patchbay is a routing matrix. It has sources horizontally across the top
and destinations vertically on the right. Touch the grid to add or remove a routing.
NOTE: THE PATCHBAY WILL LOOK DIFFERENT IF IT'S BEEN CHANGED FROM
THE FACTORY DEFAULT SETUP SHOWN HERE!
We'll start with the default setup, annotated to help make it clear what's going on.
Assume two computers are connected. Computer #1 is connected to USB port 1 on the
rear panel, and Computer (or iPad) #2 is connected to USB port 2.