User Manual

36
with dark shading. You can select or deselect destination ports by clicking on the port in
the right hand pane.
In the screen shot above, the blue shading indicates that the second port on USB
Device Jack 1 has been selected and is routed to MIDI port 2 on USB Device Jack 2.
In the default configuration, the rear-panel MIDI DIN In is routed to both computer
devices; and each computer device has one MIDI Port going to the other computer
device, and another to the MIDI DIN out.
MIDI Management
In addition to the MIDI routing capability, four types of processing for both MIDI input
and output streams are available to manage the MIDI data in your setup. These are
described in the following sections. Note that the processing and routing is applied in
the following order:
1. Input port filtering
2. Input controller filtering
3. Input channel remapping
4. Input controller remapping
5. Routing (distribution and merging of input data to output paths)
6. Output port filtering
7. Output controller filtering
8. Output channel remapping
9. Output controller remapping