User Manual

v.1.2

1. Touch “Out” on the bottom row.

- The LED turns green (Signal Level mode); you may want to touch it again to toggle it

to Gain Set mode.

2. Touch “1” and “2” on the top row (or either one if they’re configured as a stereo pair,

as they are by default).

3. Turn the Rotary Knob to adjust the level.

Rotary Knob Push functions

FUNCTION

ROTARY KNOB PUSH COMMAND

Mute all outputs

Double push

Save all settings to internal memory

Single push

Power down

Push and hold until each meter shows a single red

and a single amber LED

Power up

Single push (when powered down)

Bootloader mode (for manual firmware updates)

Push and hold until each meter shows a single red

LED, then release

Reset

Push and hold until all LEDs turn off, then release

LED Meter Levels